Epoxy Resin – Trustic

Crystal Clear Casting Epoxy Resin: Suitable for most crafts and hobby projects such as Jewelry Casting, River Tables, Canvas Painting and Coins casting purposes etc. It comes in two parts - Resin & Hardener. These two parts MUST be mixed in precise ratio and mixed well to get best results.Features:Crystal clear, high gloss and transparentAutomatic leveling and anti-foamingLow set-to-touch and cure timeGoes well with pigments of all colorsNon toxic, low odor and low VOCHigh hardness after dryingGlossy like mirrorTechnical Specifications:Ratio A:B: 2.7 : 1 (by volume)Pot Life: 30 minCoverage: 0.8 Kg required for 1 mm thickness of 1 square meter areaSet to touch time: 12 hrsCuring Time: 18 hrs (varies based on ambient temp / humidity / thickness)Surface ready to use time: 72 hrsDirections:Step 1: Wear safety glasses and gloves. Measure 2.7 parts of part A and 1 part of part B by volume. Mix thoroughly.Step 2: On porous objects such as made out of wood, paint a seal coat of same epoxy mixture of A & B first to seal any pores to prevent air bubbles from forming.Step 3: Make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured.Step 4: If multiple flood coats are to be applied, make sure that each flood coat is less than 1/2" thick and maintain a gap of 4 hours between each flood coat.Step 5: Pop air bubbles using a heat gun or plumber torch.Step 6: Leave the surface for epoxy curing
FULL SATISFACTION GUARANTEED!! Crystal Clear Casting Epoxy Resin: Suitable for most crafts and hobby projects such as Jewelry Casting, River Tables, Canvas Painting and Coins casting purposes etc. It comes in two parts - Resin & Hardener. These two parts MUST be mixed in precise ratio and mixed well to get best results. Note: Make sure to store the epoxy resin jugs away from direct sunlight at room temperature around 20 to 22 deg C. Keep your project at room temperature so that the project surface is not too cold before pouring epoxy on it.     Features: Crystal clear, high gloss and transparent, yellow resistantAutomatic leveling and anti-foamingLow set-to-touch and cure timeGoes well with pigments of all colorsNon toxic, low odor and low VOCHigh hardness after dryingGlossy like mirrorTechnical Specifications:Ratio A to B: 2.7 to 1 (by volume) OR 3 to 1 (by weight)Pot Life: 30 minCoverage: 1 thickness for 1 sq ft area needs about 2.5 L of epoxy (Part A + B)Set to touch time: 12-14 hrsCuring Time: 20 - 24 hrs (varies based on ambient temp / humidity / thickness)Surface ready to use time: 72 hrsDirections:Step 1: Wear safety glasses and gloves. Measure 2.7 parts of part A and 1 part of part B by volume (OR 3 to 1 by weight). Mix thoroughly.Step 2: On porous objects such as made out of wood, paint a seal coat of same epoxy mixture of A & B first to seal any pores to prevent air bubbles from forming.Step 3: Make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured.Step 4: If multiple flood coats are to be applied, make sure that each flood coat is less than 1/2 thick and maintain a gap of 4 hours between each flood coat.Step 5: Pop air bubbles using a heat gun or plumber torch.Step 6: Leave the surface for epoxy curing   MSDS can be downloaded from here

LAVAUK Acacia wood & Transparent Epoxy resin Napkin holder for table, Rustic farmhouse napkin organisation for kitchen, dining, counter tops, restaurant or outdoors, 6x5x2.5 inches

Walnut Live Edge Burl Dining Tabletop - Gray River Resin Epoxy - 80 x 40 x 2

Epoxy Resin Wood Stool, Epoxy Furniture Live Edge, Rustic Chair

Hammerhead Shark and Diver Resin Night Light Epoxy and Wooden Lamp Epoxy Resin Wood Rustic Creative Handmade Furniture and Decor

Rustic Olive Wood and Epoxy Resin Serving Board 17 Handmade By Artist – Maison Carthage

Epoxy Resin – Trustic

Blue Resin Table Lamp, Epoxy Resin Edison Lamp, Handmade Rustic Resin Table Lamp, Epoxy Edison Desk Lamp, Wood and Resin Lamp (Blue Resin) (Transparent Resin) : Handmade Products

Blue Resin Table Lamp, Epoxy Resin Edison Lamp, Handmade Rustic Resin Table Lamp, Epoxy Edison Desk Lamp, Wood and Resin Lamp : Handmade Products

Hammerhead Shark and Diver Resin Night Light Epoxy and Wooden Lamp Epoxy Resin Wood Rustic Creative Handmade Furniture and Decor

Use these molds with our General Casting Epoxy Resin to create interesting objects. Just mix and pour the resin into the mold and let it sit for

Silicon Molds for Epoxy Resin Objects

Epoxy Resin Night Light, Unique Color Changing Resin Wood Lamp, Wooden Night Lights, Epoxy Resin Wood Rustic Table Lamp, Rustic Home Decor

Bigger is always better at Trustic ! - New Horizon Mall

Trustic Epoxy Hardeners recalled due to improper labelling and lack of child-resistant packaging - Canada.ca