Electroválvula ST-SA 3/8 latón FKM 0-10bar 12V DC

Válvula solenoide de 2 vías de JP Fluid Control (tipo ST-IA) con rosca G 1/2 pulgadas y una bobina de 12 V DC. La función del circuito de la

Electroválvula ST-IA 1/2'' latón FKM 0,5-16bar 12V DC

Potermic - Catálogo / Tarifa 2019-2020 by Potermic - Issuu

Fielect Electroválvula eléctrica de latón 12V DC, válvula electromagnética de aire PT de 1/4 normalmente colsed 2 posiciones Tipo de conexión de 2 vías de actuación directa para agua, aire, diesel

U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a high-quality brass body, 3/8 inch female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water.

U.S. Solid 3/8 Electric Solenoid Valve 12-VDC, Viton Gasket, Air, Gas, Fuel Normally Closed

tarifa SEI 2012 - Salvador Escoda SA

Model BZW-10 of our brass valve line is a two-way, semi-direct lift valve with a normally closed operating position. This means that there are two

3/8'' 12V DC Electric Brass Solenoid Valve

Válvula solenoide de 2 vías de JP Fluid Control (tipo ST-IA) con rosca G 1/2 pulgadas y una bobina de 12 V DC. La función del circuito de la

Electroválvula ST-IA 1/2'' latón FKM 0,5-16bar 12V DC

Electrovalvulas inoxidables. Ofertas y Comprar Online

catalogo_resumido_8.5_es by camozzi venezuela - Issuu

3/8'' 12V DC Electric Brass Solenoid Valve